 |
 Load and
Torque Cells |
|
|
|
 |
"S"
Beam Load Cells
S-Beam load cells get their name from their S
shape. S-Beam load cells can provide an output if under
tension or compression. Applications include tank level,
hoppers and truck scales. They provide superior side
load rejection. |
|
|
 |
Beam
Load Cells
Cantilever type sensor to measure load,
center or weight. Load support maybe single or dual and
load is introduced on a different axis to the load
support. Typically on a beam load cell the strain gages
are place on a horizontal beam, located at some distance
from the load introduction axis. |
|
|
 |
Button
Diaphragm Load Cells
Small, low profile sensors to measure force,
load or weight in compression in many instances not much
larger than a button. Load is introduced on small center
bump. A diaphragm between the center bump and sensor
outer wall is used to seal the strain gage
cavity. |
|
|
 |
Canister
Load Cells
Canister load cells are used for single and
multi-weighing applications. Many feature an all
stainless steel design and are hermetically sealed for
washdown and wet areas. |
|
|
 |
Miniature
In Line Tension/Compression Load
Cells
Small
sensor to measure force, load or weight in both
directions (i.e. tension and compression) sometimes
referred to as universal. Sensors may have at either end
female or male load introduction points. |
|
|
 |
Platform
Load Cells
Platform and single point load cells are used
to commercial and industrial weighing systems. They
provide accurate readings regardless of the position of
the load on the platform. |
|
|
 |
Reaction
Torque Cells
Sensor device designed to measure the
rotational strain (i.e., or load or force) generated by
motors, switches, axles or shafts AND a fixed mounting
plate. The torque sensor is mounted in between the fixed
mounting plate and the device which is generating the
rotational force. |
|
|
 |
Specialty
Load Cells
Force, load or weighing sensor designed for a
specific application. That application may have specific
mechanical, temperature or electrical
requirements. |
|
|
 |
Tank
and Bin Weighing Assemblies
Complete set of measurement
hardware suitable for tank, bin or vessel weighing. The
weighing assembly consists of a load cell and a
dedicated set of hardware to interface the load cell to
the structure. A good weighing assembly minimizes load
cell horizontal loads generated by the structure or by
environmental temperature differences while maximizing
the vertical load introduction. |
|
|
 |
Tension
Link Load Cells
Compression/tension load cells can be used
for applications where the load may go from tension to
compression and vice versa. They are ideal for space
restricted environments. Threaded ends facilitate easy
installation. |
|
|
 |
Through
Hole Load Cells
Force, load or weight measuring sensors with
center see-through hole. Load is usually introduced on a
lip located around the center hole. |
|
|
|
|
|
|